![Open in new window](javascript:CaricaFoto("http://indiamachineshop.com/uploads/img49676a6be069a.gif");)
Omative - Pro is a Window based Software Package that runs on PCs networked to Machines fitted with Omative ACM ( Adaptive Control & Monitoring ) Systems.Omative-Pro enables shopfloor managers to monitor and control machine tool productivity .
Omative ACMs works on Internationally patented Spindle Load Technology and reduces Cycle Times significantly by adjusting the Feed Rates automatically to the ‘Safest Maximum’ , in Real Time and all the times and also prevents Tool Breakages .(Kindly refer to CNC Control, Milling , Turing Section in this Web Site for more details about Omative ACMs ).
When CNC Machines in the Shopfloor are fitted with Omative ACMs, they could be networked with Omative-Pro to get various Reports of each such Machine which could of great assistance to monitor and control Productivity.
Following are the various Reports which could be generated by Omative -Pro .
I. GENERAL MANAGEMENT :
1. Production Line Performance
2. Machine Performance Statistics
3. Machining Cost Analysis
4. Tooling Cost Analysis
5. Machine Tool Investment Analysis
II. PRODUCTION MANAGEMENT :
1. Production Line Performance
2. Machine Performance Statistics
3. Machining Cost Analysis
4. Tooling Cost Analysis
5. Machine Tool Investment Analysis
II. PRODUCTION MANAGEMENT :
1. Cycle Times
2. Production Output
3. Shift Performance
4.Maintenance Records
5.Machine Efficiency
III.Shopfloor Supervision
2. Production Output
3. Shift Performance
4.Maintenance Records
5.Machine Efficiency
III.Shopfloor Supervision
1. Cutting Tool Utilization
2. Cycle Times
3. Machine Tool & Performance
4.Part Count
5.Job Progress
2. Cycle Times
3. Machine Tool & Performance
4.Part Count
5.Job Progress
IV. Machine Operator
1. Tool Wear Status
2. Machine Cutting /Not Cutting
3. Spindle On /Off
4. Tool & Spindle Overload Alert
5. Spindle Load & Machine Feed Variation
Kindly contact +91 - 9448376319 or +91-80-65364695 or send Mail to sales@sriganesh.org or ceo.sriganesh@gmail.com or visit Web Site www.omative.com for more details .
1. Tool Wear Status
2. Machine Cutting /Not Cutting
3. Spindle On /Off
4. Tool & Spindle Overload Alert
5. Spindle Load & Machine Feed Variation
Kindly contact +91 - 9448376319 or +91-80-65364695 or send Mail to sales@sriganesh.org or ceo.sriganesh@gmail.com or visit Web Site www.omative.com for more details .
